TACTICAL EVO - Hlavní strana

Showing 41-80 of 116 item(s)

Stock screw SA 58 (vz 58, 585 and clones)

Stock screw SA 58 (vz 58, 585 and clones) 2

IN STOCK

Tuning

Stock screw SA 58 (vz 58, 585 and clones)

Modernized version of the stock screw for SA 58 submachine gun (vz 58 and clones) on an Allen key. A big problem with the original screw, which has a classic "screw groove", is very complicated tightening or loosening of this screw. Either the screw cannot be tightened properly or, conversely, cannot be loosened. The stock screw we sell solves this...

copy of Teleskopický obušek Easy Lock 20" (508mm)

copy of Teleskopický obušek Easy Lock 20" (508mm) 2

IN STOCK

Defences for men and women

copy of Teleskopický obušek Easy Lock 20" (508mm)

Muzzle brake CZ SCORPION EVO 3 (M18x1)

Muzzle brake CZ SCORPION EVO 3 (M18x1) 2

IN STOCK

Muzzle brake and compensator

Muzzle brake CZ SCORPION EVO 3 (M18x1)

Muzzle brake SAR2 for CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the side bounce of the weapon. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation, locking the brake...

copy of Teleskopický obušek Easy Lock 20" (508mm)

IN STOCK

Defences for men and women

copy of Teleskopický obušek Easy Lock 20" (508mm)

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1)

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1) 2

IN STOCK

Muzzle brake and compensator

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1)

The SAR2 muzzle brake for the CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the weapon from bouncing sideways. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation,...

copy of Teleskopický obušek Easy Lock 20" (508mm)

copy of Teleskopický obušek Easy Lock 20" (508mm) 2

OUT OF STOCK

Defences for men and women

copy of Teleskopický obušek Easy Lock 20" (508mm)

CZ 457 trigger resistance springs

IN STOCK

Tuning

CZ 457 trigger resistance springs

A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact...

copy of Teleskopický obušek Easy Lock 20" (508mm)

IN STOCK

Defences for men and women

copy of Teleskopický obušek Easy Lock 20" (508mm)

Forehead breech for CZ P-10

Forehead breech for CZ P-10 2

IN STOCK

Tuning

Forehead breech for CZ P-10

Dural breech for CZ P-10 pistol. Breech is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets a new and extraordinary dimension.It also works with the first generation pistol.

copy of Teleskopický obušek Easy Lock 20" (508mm)

copy of Teleskopický obušek Easy Lock 20" (508mm) 2

IN STOCK

Defences for men and women

copy of Teleskopický obušek Easy Lock 20" (508mm)

Trigger resistance springs CZ P-10

IN STOCK

Tuning

Trigger resistance springs CZ P-10

The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are...

Weight 170g with MLOK Mounting System

Weight 170g with MLOK Mounting System 2

New

IN STOCK

Tuning

Weight 170g with MLOK Mounting System

This 170g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

copy of Teleskopický obušek Easy Lock 20" (508mm)

copy of Teleskopický obušek Easy Lock 20" (508mm) 2

IN STOCK

Defences for men and women

copy of Teleskopický obušek Easy Lock 20" (508mm)

Weight 280g with MLOK Mounting System

Weight 280g with MLOK Mounting System 2

New

IN STOCK

Tuning

Weight 280g with MLOK Mounting System

This 280g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

copy of Teleskopický obušek Easy Lock 20" (508mm)

copy of Teleskopický obušek Easy Lock 20" (508mm) 2

IN STOCK

Defences for men and women

copy of Teleskopický obušek Easy Lock 20" (508mm)

Tactical covers for M-LOK

Tactical covers for M-LOK 2

New

IN STOCK

Adapters, reducers, recoil pads

Tactical covers for M-LOK

Plastic Tactical Covers for M-LOK. These covers are designed for mounting on M-LOK rails, providing additional protection and comfort. They are often used to improve grip and protect against heat during shooting. Plastic versions are popular due to their lightweight construction.ets.

Waterproof Notebook JASE

Waterproof Notebook JASE 2

New

IN STOCK

Practical accessories

Waterproof Notebook JASE

Pocket-sized waterproof notebook in green design. This notebook features a spiral binding that ensures maximum clarity of your notes. Its dark green cover is ideal for natural environments where white paper could reveal your position. The notebook contains 48 sheets of anti-reflective, waterproof green all-weather paper with horizontal lines. Thanks to...

Tactical Evo LIMITED EDITION identification tag

Tactical Evo LIMITED EDITION identification tag 2

New

IN STOCK

Tactical clothing and equipment

Tactical Evo LIMITED EDITION identification tag

We have a unique and LIMITED EDITION of identification tags (dog tags) from Tactical Evo! To mark the launch of our limited-edition Tactical Evo TK4 CZ 600 MDT bipod, we have prepared a highly collectible collection of these tags. The entire series consists of only 100 pieces, and each piece is uniquely numbered. If you are interested in a specific serial...

Noise Moderator for PCP Air Rifles 1/2x20UNF

Noise Moderator for PCP Air Rifles 1/2x20UNF 2

New

IN STOCK

Slings and accessories

Noise Moderator for PCP Air Rifles 1/2x20UNF

This noise moderator is suitable for all PCP air rifles with calibers ranging from 4.5mm to 6.35mm, featuring an external barrel thread of 1/2x20 UNF. Made from anodized aluminum, it is ideal for situations where reducing the noise of your air rifle is necessary.

STOCK

STOCK 2

IN STOCK

Tuning

STOCK

The goods are in stock. We are preparing text.

Pistol grip ATI for AR-15 / AR-10

Pistol grip ATI for AR-15 / AR-10 2

OUT OF STOCK

Tuning

Pistol grip ATI for AR-15 / AR-10

The high-quality ATI X1 pistol grip is designed for the AR-15 and AR-10 weapon, including their clones and modifications. This grip pistol grip is made of a special DuPont polymer and is resistant to water, extreme temperatures, chemicals and normal mechanical damage.Ergonomics is designed to fit each hand and the grip is as comfortable as possible. The...

Pistol grip ATI X2 for AR-15

Pistol grip ATI X2 for AR-15 2

OUT OF STOCK

Tuning

Pistol grip ATI X2 for AR-15

The high-quality ATI X2 pistol grip is designed for the AR-15 weapon, including their clones and modifications. This grip pistol grip is made of a special DuPont polymer and is resistant to water, extreme temperatures, chemicals and normal mechanical damage.Ergonomics is designed to fit each hand and the grip is as comfortable as possible. The selected...

Trigger resistance spring CZ 557, 550 and 527

IN STOCK

Tuning

Trigger resistance spring CZ 557, 550 and 527

Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

Trigger resistance spring TIKKA T3, T3x and T1x

IN STOCK

Tuning

Trigger resistance spring TIKKA T3, T3x and T1x

Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

SAKO 75, 85, 595 and 695 trigger resistance spring

IN STOCK

Tuning

SAKO 75, 85, 595 and 695 trigger resistance spring

Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

IN STOCK

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

IN STOCK

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

IN STOCK

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

Reduction for Walther LG 400

Reduction for Walther LG 400 2

IN STOCK

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

IN STOCK

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

Walther regulator pressure transducer

Walther regulator pressure transducer 2

IN STOCK

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

Enlargement of the Walther LG 300 pressure regulator...

Enlargement of the Walther LG 300 pressure regulator... 2

IN STOCK

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber with ASSEMBLY

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

Silencer for Walther LG 300/400 with ASSEMBLY

Silencer for Walther LG 300/400 with ASSEMBLY 2

IN STOCK

Tuning

Silencer for Walther LG 300/400 with ASSEMBLY

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.If you do not dare to install this product, we will be happy...

Walther regulator pressure setting

Walther regulator pressure setting 2

IN STOCK

Tuning

Walther regulator pressure setting

Do you want to set the pressure regulator to your desired value and do not want to buy a special measuring device? Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly? We will be happy to provide you with this service. We provide pressure adjustment...

Walther LG 300 tension lever pin

Walther LG 300 tension lever pin 2

IN STOCK

Tuning

Walther LG 300 tension lever pin

The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever. You can then fit it with a duralumin pin made by us. We supply the tensioning pin in silver or black.The set...

Shortening the Walther LG 300 tension lever

Shortening the Walther LG 300 tension lever 2

IN STOCK

Tuning

Shortening the Walther LG 300 tension lever

The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever.Shortening the tension lever seems to be very easy, however, it is a very hard hardened material, so shortening and...

Muzzle brake F1 PRO for CZ SCORPION (M18x1)

Muzzle brake F1 PRO for CZ SCORPION (M18x1) 2

IN STOCK

Muzzle brake and compensator

Muzzle brake F1 PRO for CZ SCORPION (M18x1)

The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth...

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1)

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1) 2

IN STOCK

Muzzle brake and compensator

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1)

1 Reviews

The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth...

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF)

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF) 2

IN STOCK

Muzzle brake and compensator

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF)

The PCC muzzle brake is designed for the CZ SCORPION EVO CARABINE and not only compensates for recoil and shot, but also prevents the weapon from bouncing after the shot.The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the flow direction of the gases escaping from...

Fuse cover for CZ SCORPION EVO 3

Fuse cover for CZ SCORPION EVO 3 2

IN STOCK

Tuning

Safety cover for CZ SCORPION EVO 3

Safety cover for CZ SCORPION EVO 3.Are you not using the safety on the right or left side of the weapon? You can easily blind the unused side. Blinding an unused safety is very easy and you can handle it in a few seconds.

1
2
3

Product added to wishlist

Product added to compare.